Samsung SMX-C24BP/XER, SMX-C24BP/EDC, SMX-C200LP/EDC manual Example of Time Lapse REC, Timeline

Example of Time Lapse REC

Total time for recording

Recording interval

Timeline

Time for recording on the storage media (a video clip of Time Lapse REC)

Time Lapse REC records image frames at the predefined interval over the total recording time to produce a time-lapse video.

Time Lapse REC is useful for filming in the following situations:

•Blooming flowers

•Insect’s skin-casting

•Clouds rolling by in the sky

0:00:00/0:59:59	0:19:59/0:59:59	0:39:59/0:59:59	0:59:58/0:59:59
100-0001	100-0001	100-0001	100-0001

•This function is disabled after being used one time. To use it again, you must reset it.

•25 captured images compose a video of 1 second length. Since the minimum length of a video to be saved by your camcorder is one second, the interval defines how long the Time Lapse Recording should be set for. For example, if you set the interval to "30 Sec," Time Lapse Recording should be set for at least 15 minutes to record a minimum video length of 1 second (25 images).

•Once the Time Lapse REC finishes recording for its total recording time, it switches to standby mode.

•Press the Recording start/stop button if you want to stop the Time Lapse REC.

•Audio is not recorded during Time Lapse Recording.

•When a video recording fills up 1.8GB of storage media, a new recording file is automatically started at that point.

•When the battery is discharged exhausted during Time Lapse REC, it saves recording up to that point and switches to standby mode. After a while, it displays a warning message, then turns off automatically.

•When memory runs out while performing Time Lapse REC, the camcorder switches to standby mode after saving what was recorded so far.

•We recommend using the AC power adaptor when using the Time Lapse REC function.

•When a time lapse recording starts, a message of "Time Lapse Recording" blinks on the screen and it appeared to be as if the screen is stopped. This is a normal operation: do not remove the power source or memory card from the camcorder.

57