Samsung SMX-C200BP/EDC manual Important information on use, Do not subject the camcorder to impact

Important information on use

•Do not subject the camcorder to impact:

-This camcorder is a precision machine. Take great care that you do not strike it against a hard object or let it fall.

-Do not use the camcorder on a tripod in a place where it is subject to severe vibrations or impact.

•No sand or dust!

-Fine sand or dust entering the camcorder or AC power adaptor could cause malfunctions or defects.

•No water or oil!

-Water or oil entering the camcorder or AC power adaptor could cause electric shock, malfunctions or defects.

•Heat on surface of product:

-The surface of the camcorder will be slightly warm when used, but this does not indicate a fault.

•Be careful of unusual ambient temperature:

-Using the camcorder in a place where the temperature is over 104°F (40°C) or lower than 32°F (0°C) may result in abnormal recording/playback.

-Do not leave the camcorder on a beach or in a closed vehicle where the temperature is very high for a long time: This could cause a malfunction.

•Do not point directly at the sun:

-If direct sunlight strikes the lens, the camcorder could malfunction or a fire could occur.

-Do not leave the camcorder with the LCD screen exposed to direct sunlight: This could cause a malfunction.

•Do not use the camcorder near TV or radio:

-This could cause noise to appear on the TV screen or in radio broadcasts.

•Do not use the camcorder near strong radio waves or magnetism:

-If the camcorder is used near strong radio waves or magnetism, such as near a radio transmitter tower or electric appliances,

vinoise could enter video and audio that

are being recorded. During playback of normally recorded video and audio, noise may also be present in picture and sound.

•Do not expose the camcorder to soot or steam:

-Thick soot or steam could damage the camcorder case or cause a malfunction.

•Do not use the camcorder near corrosive gas:

-If the camcorder is used in a place where there is dense exhaust gas generated by gasoline or diesel engines, or corrosive gas such as hydrogen sulphide, the external or internal terminals could corrode, disabling normal operation, or the battery connection terminals could corrode, so that power will not turn on.

•Do not use the camcorder near an ultrasonic humidifier:

-Calcium and other chemicals dissolved in water could scatter in the air, and white particles could adhere to the optical head of the camcorder, which could cause it to operate abnormally.

•Do not clean the camcorder body with benzene or thinner:

-The coating of exterior could peel off or the case surface could deteriorate.

-When using a chemical cleaning cloth, follow the instructions.

•Keep the memory card out of reach of children to prevent swallowing.

•To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily accessible.