Samsung SMX-C24LP/XIL manual Initial Setting Time Zone, Date And Time & Osd Language, preparation

preparation

INITIAL SETTING : TIME ZONE, DATE AND TIME & OSD LANGUAGE

•Initial setting is available in all operating modes.

•To read the menus or messages in your desired language, set the OSD language.

•To store the date and time during recording, set the time zone and date/time.

Turning the power on and setting the date and time

Set the date and time when using the camcorder for the first time. If you do not set date and time, the date and time (time zone) screen appears every time you turn on your camcorder.

1.Open the LCD Screen and press the Power button to turn on the camcorder.

•When you turn on your camcorder for the first time, the Time Zone screen appears based on London, Lisbon. (Greenwich Mean Time)

•You can also set the "Time Zone : Home" in the "Settings" menu. ²page 74

2.Select your geographical area with Control button (￿ / ￿), then press the OK button.

•The "Date/Time Set" screen appears.

3.Select the date and time information, and change the setting values by using the Control button (￿/￿/￿ / ￿).

4.Make sure the clock is correctly set, and then press the OK button.

Home

London, Lisbon

GMT 00:00 01/JAN/2010 00:00

Date/Time Set

Date/Time Set

Home

Day Month Year Hour Min

01 / JAN / 2010 00 : 00

Visit : 01/JAN/2010 00:00

Back Move OK

Tip	Turning the date and time display on/off
	To switch the date and time display on or off, access the menu and change the Date/Time Display
	mode. ²page 76
	Simple setting of the clock by time difference
	You can easily set the clock to the local time by setting a time difference when using your camcorder
	abroad. Select "Time Zone" on the menu, then set the time difference. ²page 74
	• The year can be set up to 2037, using the "Home" menu.
	• According to the Daylight Savings time setting, the year may be displayed "2009" or "2038."
	• Activating the icon ( ) forwards the time by 1 hour.
	• Rechargeable built-in battery

	-	The rechargeable battery is built in the camcorder to maintain the basic settings (date, time,
		etc.) even if the camcorder is turned off.
	-	The settings are initialized if the battery is run out or discharged. In this case, set the date and
		time again after charging the battery pack.
28	-	Battery capacity decreases over time and through repeated use. If the battery is dead and not
		recharged, contact a SAMSUNG authorized service centre.