network connection & setup

You can set up the network settings according to your network configurations.

Network connection and setup processes are given as follows.

Connect the camera to an IP router with a xDSL/Cable modem Page 19~21 Connect the camera to an IP router with local area networking Page 22~23 Connect the camera directly to a DHCP-based xDSL/Cable modem Page 24~25 Connect the camera directly to local area networking Page 26

Compliant IP routers are as listed below.

-Linksys

-D-Link

-Netgear

Compliant PoE Switches are as listed below.

-Linksys SRW224G4P

-D-Link DES-1316

-SMC SMCPWR-INJ3

Using non-recommended IP router may cause the network connection error.

Depending on the performance of the PC (Viewer installed) or the network, the video transmission can be delayed or even disconnected.

For soft video transmission, you can set the bandwidth in <NETWORK> <STREAMING SETUP> in the setup menu.

The IP and MAC addresses used in this manual are for illustrative purposes only. Therefore, you must refer to Notice the network settings of your PC and do not enter the addresses presented in this manual.

18_ Network Connection & Setup

Page 22
Image 22
Samsung SNC-B2315P manual Network connection & setup