[STEP 2] Checking if the IP router is connected to the xdSl/Cable modem properly

Select <Status> from the Settings menu of the IP Router

If it is properly connected, <IP Address>, <Subnet Mask> and <Gateway> provided by your ISP are displayed. Please remember these values because they are required so that an external remote computer of the IP router connects to the camera. However, note that certain ISPs change the settings of <IP Address>, <Subnet Mask>and <Gateway>on a regular basis

If the IP router is not properly connected, press the [Connect] button to try to reconnect or check if the settings of the IP router are correct.

[STEP 3] Setting the IP address

Refer to "Static IP Setting" on page 28 or "Dynamic IP Setting" on page 32.

[STEP 4] Connecting a local PC in the IP router to the camera

1

2

Run the IP Installer on your local PC and search for the camera.

If found, double-click the camera to start the Internet browser and try to connect to the camera. Alternately, launch the Internet browser manually and enter the IP address of the camera found in the address bar to connect to it. ex) http://192.168.1.2

20_ Network Connection & Setup

Page 24
Image 24
Samsung SNC-B2315P manual Setting the IP address, Connecting a local PC in the IP router to the camera