Samsung SNC-B2315P To setup the camera, Click System  Camera, You can select one from Image Flip

To setup the camera

1 Click <SYSTEM>  <CAMERA>.

You can select one from <Image Flip>,

<Shutter>, <IRIS>, <BLC>, <AGC>, <White Balance>, <Day & Night>, <Detail>, <Y-Level> and <C-Level>.

2 To complete the setting, click the [Apply] button.

<Image Flip>: Flips the image in vertical or horizontal direction.

<Shutter>: Electronic shutter speed can be adjusted if monitoring a fast-moving subject. (Available Speeds: Off, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10K, Auto X2, Auto X4, Auto X6, Auto X8, Auto X12, Auto X16, Auto X24, AutoX32, AutoX48, AutoX64, AutoX96, AutoX128, and AutoX256)

<IRIS>: Automatically control the iris depending on the amount of incoming light. At Level 1, brightness is set; at Level 2, shutter speed is set.

WDR Level 1: 0, 1, 2, 3, 4, 5, 6, 7, 8 Level 2: 0, 1, 2, 3, 4, 5, 6, 7, 8

ALC Level 1: 0, 1, 2, 3, 4, 5, 6, 7, 8

ELC Level 1: 0, 1, 2, 3, 4, 5, 6, 7, 8

<BLC>: Allows for appropriate correction if the subject is situated under severe backlight. (Available Settings: Off, Bottom, Top, Left, Right, and Center)

<AGC>: Automatically controls the gain when video data of less than a specific level of brightness is acquired (poor lighting). This option is deactivated if Shutter is set to auto.

(Available Settings: Off, Low, and High)

<White Balance>: A correction feature that ensures white balance under any level of color temperature.

ATW1: The range of the color temperature that can be changed is approx. 2500K – 9300K.

ATW2: The range of the color temperature that can be changed is approx. 2000K – 10,000K.

AWC: The color temperature is adjusted appropriately to the current surroundings.

3200K: The color temperature is set to 3200K.

5600K: The color temperature is set to 5600K.

<Day & Night>: The camera can be configured to record in color during the day and in black and white at night. (Available Settings: Color, BW, Auto, and Ext)

The IR (Infrared) filter function of the camera can be switched on or off.

<Detail>: Enables vertical and horizontal sharpness control. (Available Settings: 0, 1, 2, and 3)

<Y-Level>: Used to configure the sync signal and total brightness signal levels. (Available Settings: 0, 1, 2, 3, 4, 5, 6, 7, and 8)

<C-Level>: Used to configure the burst signal and total color signal levels. (Available Settings: 0, 1, 2, 3, 4, 5, 6, 7, and 8)

Setting Up _59

07 SETTING UP