English - 13
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1If the television is in Standby mode, press the POWER() button
on the remote control.
2To start the Plug & Play, select the Start and press the ENTER
button.
Result:The available languages are listed.
3Select the appropriate language by pressing the …or † button.
Press the ENTER button to confirm your choice.
Result:The message Check antenna input is displayed.
4Make sure that the antenna is connected to the TV, and then
press the ENTER button.
Result:The available areas are listed.
5Select the appropriate area by pressing the …or † button.
Press the ENTER button to confirm your choice.
Result:The Auto Store menu is displayed.
6Press the ENTER button to start the search
Result:The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
➢To stop the search before it has finished or return to normal
viewing, press theEXIT or ENTER button.
7When the channels have been stored, the Clock Set menu is
displayed. Press the ENTER button to set the current time.
Press the œor √button to move to the hour or minute.
Set these by pressing the …or †button.
Press the ENTER button to confirm your choice.
8When it has finished, the message Enjoy your watching is
displayed, and then the channel which has been stored will be
activated.
Plug & Play Feature
Plug & Play
Start
Start Plug & Play
Language
Plug & Play
Move
Enter Skip
Area
Austria
Belgium
Croatia
Denmark
Finland
France
Germany
Plug & Play
Move
Enter Skip
Enter Return
Plug & Play
OK
Check antenna input.
Enter Skip
Plug & Play
Start
Auto Store
Enter Skip
Plug & Play
Stop
Auto Store
175 MHz
18%
Enter Skip
Plug & Play
Clock Set : - - : - -
Enter Skip
Enjoy your watching.
OK
BP68-00391A-00Eng 7/29/04 2:52 PM Page 13