Samsung SRD-450 user manual Changing Remote Control ID, Overview

Changing Remote Control ID

In a multi-DVR system using a single remote control, you can control only the DVR that matches the ID that you have set using the ID button.

1.Press the [ID] button to check the ID of each of "REMOCON ID" and "SYSTEM ID".

 The defaults are 00 for the System ID and 00 for the Remote ID, respectively.

2.To change the Remote ID of the IR REMOTE CONTROLLER, press and hold the [ID] button while entering a desired combination of two digits from 00 to 99.

3.To change the ID of the DVR, refer to "REMOTE CONTROLLER > REMOTE CONTROLLER ID". (Page 26)

4.Press the ID button of the IR REMOTE CONTROLLER to check the ID.

M If the system number defined in "REMOTE CONTROLLER" is different from the number specified using the remote control, no other button than the [ID] buttons will operate.

OVERVIEW

English _13