Samsung SRD-450 Sound, Audio, Buzzer, You can use the remote control to activate the buzzer

SOUND

You can configure the settings of AUDIO and BUZZER.

See the previous section to repeat steps 1~3. (Page 23)

AUDIO

You can select to input the live audio source and select an audio channel.

Using the mouse may help easy setup.

1.Use the direction buttons to move to the upper <SOUND> icon and press the [ENTER] button. The AUDIO setup screen appears.

2.Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.

•LIVE AUDIO: Turn on or off the audio output. However, the channel that is set to COVERT does not output sound. (Page 28)

•DEFAULT AUDIO CHANNEL: Select an audio channel to monitor among voice signals incoming from audio ports 1 through 4.

3.When your settings are completed, press the <APPLY> button on the bottom.

Your settings will be applied.

SOUND	DVR SETUP
SOUND
AUDIO

LIVE AUDIO	ON
DEFAULT AUDIO CHANNEL	CH1
BUZZER

CANCEL APPLY CLOSE

4.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.

BUZZER

You can use the remote control to activate the buzzer.

Using the mouse may help easy setup.

1.Use the direction buttons to move to <BUZZER> in the left corner of the SOUND setup screen and press the [ENTER] button.

2.Use direction buttons (▲▼◄►) to move to <REMOTE CONTROLLER> and press the [ENTER] button to set the value.

3.When your settings are completed, press the <APPLY> button on the bottom.

Your settings will be applied.

4.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.

SOUND
AUDIO		OFF
REMOTE CONTROLLER
BUZZER
CANCEL	APPLY	CLOSE

English _33