Samsung SRD-450 user manual Adding Sequence

2.Use direction buttons (▲▼◄►) to move to a desired item, and press the [ENTER] button to set the value.

•SEQUENCE DWELL: Specify the auto sequence dwell time.

•DE-INTERLACE MODE: Set to correct option of the screen trembling during playing in 4CIF size.

•ALARM POP-UP MODE: Set to turn on or off the display of the alarm channel if an alarm occurs.

•ALARM POP-UP DWELL: Set the duration of the alarm dwell time if an alarm occurs.

•MOTION POP-UP MODE: Set to turn on or off the switching to the motion detecting channel’s full screen mode if a motion is detected.

•MOTION POP-UP DWELL: Set the dwell time of the motion pop-up.

This will display the motion popup for as much time as you specified and return to the split screen.

If an alarm occurs or a motion is detected in more than one channel, the screen will switch to a split mode for the display.

3.When your settings are completed, press the <APPLY> button on the bottom. Your settings will be applied.

4.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.

SEQUENCE

You can select a split mode of the sequence and add or adjust the sequence dwell time.

Using the mouse may help easy setup.

DVR SETUP

ADDING SEQUENCE

1.Use the direction buttons to move to the <SEQUENCE> in the left corner of the DISPLAY setup screen and press the [ENTER] button.

2.Press the <ADD> button on the bottom.

3.When the “ADD” window appears, select the TITLE input box.

DISPLAY
OSD	LIST		CREATED BY
ACTIVATION
MONITOR	DEFAULT		admin
SEQUENCE
CANCEL	ADD	APPLY	CLOSE

4.Use the virtual keyboard to enter the name and press the <SAVE> button.

M For using the virtual keyboard, refer to “Using the Virtual Keyboard”. (Page 27)

DISPLAY
OSD	ADD			CREATED BY
ACTIVATION
MONITOR	SEQUENCE TITLE	OFF		admin
SEQUENCE	ACTIVATION
	SAVE	CANCEL
	CANCEL	ADD	APPLY	CLOSE

English _31