Samsung SRD-450 Motion Sensor, To select a motion area, To deselect the motion area, Setup

MOTION SENSOR

You can set the event recording so that the DVR can detect the event and specify the recording area.

Using the mouse may help easy setup.

1.Use the direction buttons to move to <MOTION SENSOR> in the left corner of the CAMERA setup menu and press the [ENTER] button.

2.Select a channel and specify the sensitivity of the motion detection.

3.Press the <AREA SETUP> button. The motion area setup screen appears.

	CAMERA
CAMERA	CH 1	SENSITIVITY	AREA SETUP
		5
COLOR	CH 2	5	AREA SETUP
	CH 3	5	AREA SETUP
MOTION	CH 4	5	AREA SETUP
SENSOR
						DVR
			CANCEL	APPLY	CLOSE	SETUP

To select a motion area

①Move the cursor to display a white rectangle box.

②Move the box to the motion area and click the yellow box.

③The selected area will be marked in a white box.

To deselect the motion area

①Move the cursor to the selected area.

②Click the yellow cell again.

③The yellow rectangle will disappear with the motion area deselected.

To select / deselect all

①Right-click any area or press the [RETURN] button on the remote control.

②From the context menu that pops up, select a desired item.

•SELECT ALL : Selects all areas.

•DESELECT ALL : Deselects all areas.

•CANCEL : Cancels your settings.

•SAVE & EXIT : Saves your settings and exits the menu.

SELECT ALL DESELECT ALL CANCEL SAVE&EXIT

4.When your settings are completed, press the <APPLY> button on the bottom. Your settings will be applied.

5.Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.

English _29