Samsung SV-5000W manual Using the Tape Counter Using the Assemble Edit Function, Press Display

Using the Tape Counter

Using the Assemble Edit Function

B

DEX	REC.SPEED	CLK/COUNT	2	TIMER
	2		STROBE	AUDIO
1		3
			ART	INPUT

The tape counter:

◆indicates the elapsed time in the play and record modes (hours, minutes and seconds) ;

◆is reset when a cassette is inserted in the VCR ; and

◆enables you to find the beginning of a sequence easily.

☛To enable the remaining time to be calculated correctly, you must indicate the type of cassette being used. See page 23.

This function enables you to start a new recording at a specific position on the cassette while maintaining a very smooth scene change.

1	Insert the cassette to be edited in your VCR.
2	Press the PLAY button ( ) to start playback.
3	When you reach the position from which you wish to start the new
	recording, press the P/STILL button (	).
4	Press the P/STILL button ( ) again as often as necessary to

GB

	0
	PLAY
W		F.
RE		F
	2
REC	STOP	P/STILL
DISPLAY	MONITOR	A.DUB
	PLAY

100	CLR/RST
	0
	PLAY	4
REW		F.F
REC	STOP	P/STILL
	4
DISPLAY	MONITOR	A.DUB
		0:00:00

1Insert a cassette in your VCR.

2Press CLK/COUNT twice.

Result: The tape counter is displayed:

0:00:00.

➢The tape counter does not necessarily start from zero at the beginning of the tape.

3Select the required operation (play, record, fast-forward, rewind). Result: The tape counter indicates how long the cassette has

been running.

4To set the tape counter to zero at the beginning of a sequence: ◆ press DISPLAY twice to display the counter ; and

◆ press CLR/RST when you want to set the tape counter to zero.

5To fast-forward or rewind to the sequence at which the counter was set to zero, simply press REW ( ) or F.F ( ).

Result: The VCR stops automatically when the counter reaches zero.

➢Some VCR information, such as the counter, can be displayed on the television screen (unless you have deactivated the OSD mode; refer to page 16).

Press DISPLAY:

◆once to display the current function, programme number, recording speed, date, time and counter ;

◆twice to display the counter only ;

◆three times to display the time remaining on the cassette ; and

◆four times to clear the display.

	advance frame by frame, until the exact recording position is
	located.
5	While the VCR is in still mode, press the REC button to activate
	the Assemble Edit function.
	Result:		The Record symbol ( ) flashes on the display.
6	Select the source from which you wish to record by pressing:
	◆	the CH ( or		) buttons for television channels ; or
	◆	the INPUT button for the SC, AV, L I or L2 input sources.
7	Press the P/STILL button (				) to start recording.
8	When you have finished recording, press STOP (					).

W			F.
RE			F
REC	STOP		P/STILL
DISPLAY	MONITOR	3	A.DUB
	PLAY
W			F.
RE			F
REC	STOP		P/STILL
DISPLAY 5	MONITOR	4	A.DUB
	ART		INPUT
5	6
	6		CH
8	9
	CLR/RST
0		6
	PLAY
EC	STOP		P/STILL
DISPLAY	MONITOR	7	A.DUB
	8
NPUT			OUTPUT
SYSTEM			SYSTEM

38

39