Playback Conversion

Recording from Another VCR or Camcorder

TV System Conversion

	2
2	STROBE	AUDIO
2	3
	ART	INPUT
5	6
		CH
8	9	4
8	9
0	CLR/RST
0
	PLAY
W		F.
RE		F
REC	STOP	P/STILL
	STOP
6	MONITOR	A.DUB
	PLAY

You can copy a cassette to your VCR from another video source such as another VCR or a camcorder.

☛It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.

1Connect the VCR from which the cassette is to be copied to the appropriate RCA audio and video input connectors on the front of your VCR, as indicated on page 40, 41.

➢If the other video source does not supply stereo sound, connect only the left audio input (L).

You can also use a SCART cable to connect to the EURO AV on the rear of your VCR.

2Insert a blank cassette in your VCR.

3Insert the pre-recorded cassette in the other video source (VCR or camcorder).

4Press the INPUT button to select the appropriate input on your VCR:

◆ LINE 1 or LINE 2 ; or ◆ AV for the EURO AV.

5Start playing back the cassette to be copied.

6Press the REC button for at least one second to start recording on your VCR.

7When you have finished recording, press STOP ( ) on both VCRs.

You can convert the input signal into the desired TV system.

1Connect the RCA audio/video cable into the LINE 1 IN jacks on the front of the VCR.

2Press the INPUT SYSTEM button of the remote control to select the input signal identification.

◆When the Auto mode is selected, the input signal is automatically identified.

◆When the input signal is not automatically identified, select the corresponding input system manually.

3If you wish to convert the NTSC system into the PAL system, select AUTO or NTSC system with the INPUT SYSTEM button on the remote control.

Result: The display panel shows the NTSC input signal and the NTSC output signal.

◆If the input signal does not correspond to the input system of the VCR, an abnormal signal is outputted.

4Press the PAL output button on the VCR.

Result: The display panel shows the NTSC input signal and the PAL output signal, and the NTSC signal is converted into the PAL signal for output.

	LINE 1 IN
VIDEO	L AUDIO R

INPUT	2
SYSTEM	2
	OK

THROUGH
NTSC	REW
	REW

PAL

SECAM

PAL-M

P/S

W		F.
RE		F
REC	STOP	P/STILL

➢ If you wish to view the cassette being copied:

◆ your VCR must be connected as usual to the

		7
DISPLAY	MONITOR	A.DUB

television (see page 12 for further details) ; and

◆ you must select the television AV input.

You can perform playback conversion of the signal recorded on the tape into the appropriate format for the country.

1If you wish to convert the PAL system tape into the NTSC system for playback, then press the NTSC output button on the VCR. Result: The display panel shows NTSC output signal.

2Insert the video tape into the VCR.

◆ is shown on the display panel.