④[Age Time] on [Bridge Table] Management Box shows cycle of AP refreshing “Bridge Table”. The use of Default Values is recommended.
⑤After selecting Station Type you want with Radio button to refresh Stations connected to current AP, click [Refresh Bridge Table] button to confirm.
Confirm Refresh
Bridge Table
Number | Radio Button |
of | for Selecting |
Stations | Station Type |
MAC Address Information
of Connected Stations
⑥[Bridge Table] Management Box enables confirmation of Wired and Wireless Stations connected with current AP only.
⑦You can block Protocol you do not want using [Protocol] Management Box. When Protocol use is limited, some specific applications may not operate. Therefore, before setting, consult your system administrator. “Disabled” of Default Value is recommended.
⑧Selecting “Disabled” checkbox on [Protocol] Management Box leads to “Enabled”. Then, whole [Protocol] Management Box is activated to enable selecting.
⑨If you select any Protocol what you do not want among Protocols shown on [Protocol] Management Box, a phrase of “Pass” changes to “Drop”.
20
