4.PTP Setting Using AP Manager
①PTP stands for Point to Point, and it is used to connect two divided networks into one using one slot of AP as Wireless Bridge. In this case, the other slot is used for capabilities of Access Point.
(Hub)
<AP Slot Area>
Internet Network
< Point to Point Area>
< AP Slot Area>
②After executing AP Manager, select [Radio] tab on “Tab Bar”. Select slot to set PTP on “List Box” using mouse(by click the shape of Wireless LAN Card), and confirm setting status on [Radio] Dialogue Box.
Confirm Slot
Confirm AP Operation Mode | MAC ID of Wireless LAN |
| |
| Card on Selected Slot |
“Default Values”
Recommended
10
