⑤Select the following order to set IP Address.
CMD(t,p,h): 4 ↵ | Enter IP Address |
| |
Enter new IP Address : 16.3.60.208 ↵ |
|
|
|
Enter the proper IP address after “Enter new IP Address :”. Then, press
[ENTER : ↵ ]. Consult your system administrator for setting the proper value of IP Address.
⑥Select the following order to set Subnet Mask.
CMD(t,p,h): 5 ↵ | Enter Subnet Mask |
| |
Enter new Subnet Mask : 255.255.255.0 ↵ |
|
|
|
Enter the proper subnet mask after the phrase “Enter new Subnet Mask :”.
Then, press [ENTER : ↵ ].
Consult your system administrator for setting the subnet mask.
⑦Select the following order to set Gateway Address.
CMD(t,p,h): 6 ↵ | Enter Gateway Address |
| |
Enter new Gateway Address : 16.3.60.1 ↵ |
|
|
|
Enter the proper Gateway Address after “Enter new Gateway Address :” .
Then, press [ENTER : ↵ ].
Consult your system administrator for setting the gateway address.
67
