Y O U R N E W T V
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV.
You can also use your remote control to operate your VCR and cable box. See page 4.1 for details.
ŒPower
Turns the TV on and off.
´+100
Press to select channels over 100. For example, to select channel 121, press “+100,” then press “2” and “1.”
ˇMute
Press to temporarily cut off the sound.
¨CH▲ and CH▼
(Channel Up/Down)
Press CH▲ or CH▼ to change channels. (Also used to highlight selections on the
VOL -, VOL +
Press increase or decrease the volume. (Also used to make selec- tions on the
ˆStill picture
Press to stop the action during a particular scene. Press again to resume normal video.
ØP.Mode
Adjust the TV picture by selecting one of the preset factory settings (or select your personal, customized picture settings).
∏S.Mode
Adjust the TV sound by selecting one of the preset factory settings (or select your personal, customized sound settings).
”VCR controls
Stop
Press to stop a tape in your VCR.
REW (Rewind) Press to rewind a tape.
Play/Pause
Press to play or pause the tape.
FF (Fast Forward)
Press to fast forward a tape.
’MODE
Selects a target device to be con- trolled by the Samsung remote control (i.e., TV, VCR,
Cable box, or DVD).
˝Pre-CH
Tunes to the previous channel.
ÔTV/Video
Press to display all of the available video sources (i.e., Antenna/cable, VCR, DVD, Video 1~4 and
Menu
Displays the main
Ò Surround
Selects one of Phantom modes (Off, Normal, Phantom or Wide).
ÚPIP
Activates picture in picture.
CHAPTER ONE: YOUR NEW TV 1.5