S P E C I A L F E AT U R E S
Selecting a Signal Source (External A/V) for PIP
Press the Source button repeatedly to cycle through all of the available signal sources:
“TV,” “Video 1,” “Video 2,” “Video 3,” “Video 4,”
▼ For more information about external A/V components and sig- nals, see “Viewing a VCR or Camcorder Tape” on page 3.17.
If you select “TV”, the PIP image is the same as the main image.
Swapping the Contents of the PIP image and Main image
When you press the Swap button:
The image in the PIP window will appear on the main screen, and vice versa.
Changing the PIP Channel
Press the PIP CH▲ or CH▼ button to change the channel that appears in the PIP window.
Changing the Location (Rotating) the PIP Window
When you press the Locate button repeatedly, the PIP win- dow moves from corner to corner on the TV screen.
Changing the Size of the PIP Window
Press the Size button to alternate between a smaller and larg- er PIP window.
Scanning the Available Channels
This procedure scans all of the
available channels and then stores them in memory.
Press the Scan button, and the memorized channels will appear in sequence for 2 to 3 seconds per channel.
Press the Scan button again to stop the scanning process.
When the Scan button stops, the viewing mode will return to its original setting.
4.19 CHAPTER FOUR: SPECIAL FEATURES
