Samsung TSK2790F, TSK3290F, TSL3294HF, TSK2792F manual Storing Channels in Memory Automatic Method

O P E R AT I O N

Storing Channels in Memory (Automatic Method)

1

First, select the correct signal source (ANT, STD, HRC, IRC). See steps 1~4 on previous page.

Press the Menu button, then press the CH ▼ but- ton twice to highlight “CHANNEL.”

Press the VOL + button to access the CHANNEL sub-menu.

2

Press the CH ▼ button to select the “Auto pro- gram”.

3

Press the VOL + button. The TV will begin memorizing all of the available channels.

4

After all the available channels are stored, the Auto program menu reappears. Press the Menu button three times to exit.

Note: Channel auto program does not function when the V-chip is active.

▼ The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.

Press VOL+ at any time to interrupt the memorization process and return to the CHANNEL menu.

3.6 CHAPTER THREE: TV OPERATION