
Y O U R N E W T V
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a laserdisc player.
Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a laserdisc, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.9.
Œ,ØVIDEO INPUTS | ˆ SUPER VIDEO IN | |
Video signals from VCRs, laserdisc | ||
players and similar devices (Three sets | VCR or DVD player. | |
are available: AV1, AV2 and AV3). | ” DVD & DTV VIDEO INPUTS | |
´, ∏ AUDIO INPUTS | ||
Connects component video from a DVD player & | ||
Audio signals from VCRs, laserdisc | ||
players and similar devices. | ’ DVD & DTV AUDIO INPUTS | |
ˇ | ||
Connect to the audio output jacks of | ||
MONITOR OUTPUTS | a DVD player or | |
Connect to the audio/video input jacks of a | ˝ VHF/UHF | |
recording VCR. | ||
Note: The monitor out does not operate in DVD or | Connect to an antenna or to a cable TV system. | |
DTV mode. |
| |
¨ SURROUND OUTPUTS |
| |
Connects to a |
| |
Surround Right and Center. |
| |
Here are two ways to connect an audio amplifier: |
| |
1. TV - amp - speaker |
| |
2. TV - speaker(amp |
|
1.4 CHAPTER ONE: YOUR NEW TV