Network Connection
You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a wired or wireless connection.
✎✎ After you have “physically” connected your TV to your network, you must configure the network connection to complete the process. You can configure the connection during the Initial Setup process (see page 17) or after the Initial Setup process, through the TV’s menu.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem.
Wireless IP Sharer |
(router having DHCP Server) |
The LAN Port on the Wall |
LAN Cable (Not Supplied) |
This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless IP Sharer - router or modem) to transmit an encrypted security code called an access key.
Your TV is compatible with the following security protocols:
•• Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
•• Encryption Type: WEP, TKIP, AES
If you select Pure
