Volume

Set the desired volume level.

Source → TV / USB

You can select the TV or USB device content to be played when the TV turns on automatically. Select TV or USB. (Make sure that an USB device is connected to your TV.)

Antenna (when Source is set to TV)

Select ATV or DTV.

Channel (when Source is set to TV) Select the desired channel.

Contents (when Source is set to USB)

You can select a folder on the USB Device with music or photo files to be played when the TV turns on automatically.

N If there is no music file on the USB or the folder containing a music file is not selected, Timer function does not operate correctly.

N When there is only one photo file in the USB, Slide Show will not be executed.

N If the folder name is too long, the folder can not be selected.

N If the folder name to be configured by the Contents function is too long, it cannot be selected.

RepeatSelect Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.

N When Manual is selected, press the ► button to select the desired day of the week. Press the ENTEREbutton over the desired day and the cmark will appear.

N You can set the hour, minute and channel by pressing the number buttons on the remote control.

N Auto Power Off

When you set the timer on, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer on mode and prevents overheating, which may occur if a TV is on for too long time.

English - 27