Securing the TV to the wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided in the included Safety Flyer. For added stability and safety, install the anti-fall device as follows.

To Avoid the TV from Falling

1.Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto the wall.

✎✎You may need additional material such as an anchor depending on the type of wall.

✎✎Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

✎✎Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.

✎✎Screw Specifications

xx For a 19 ~ 27 inch: M4

Wall

 

xx For a 32 ~ 65 inch: M8

 

3.Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable and then tie the string tightly.

✎✎NOTE

xx Install the TV near to the wall so that it does not fall backwards.

xx It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.

xx Untie the string before moving the TV.

4.Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.

English - 20