The problem | Try this! |
|
|
The Anynet+ device won't | You cannot use the play function when Start Setup is in progress. | ||
play. | |||
|
| ||
|
| ||
| Check whether the device supports Anynet+. | ||
| Check whether the HDMI cable is properly connected. | ||
| Go to Anynet+ | Settings System Expert Settings | |
| Anynet+ | ||
The connected device is not | Scan for Anynet+ devices again. |
| |
displayed. | Anynet+ devices must be connected to the TV using an HDMI cable. Make sure | ||
| |||
| the device is connected to your TV with an HDMI cable. Some HDMI cables may | ||
| not support Anynet+. |
| |
| If the connection is terminated because there has been a power failure or the | ||
| HDMI cable has been disconnected, please scan for the device again. | ||
|
| ||
| Connect an optical cable to the TV and the receiver. | ||
The TV audio is not being | ARC enables the TV to output digital sound via the HDMI (ARC) port. | ||
played through the receiver. | However, ARC is only available when the TV is connected to an audio receiver | ||
| that supports ARC. |
|