The Schedule Recording/Timeshift Function Isn't Working

When Timeshift or Schedule Recording aren't working, these steps may help resolve the problem.

The problem

Try this!

 

 

 

Check if there is a USB device connected to the TV.

Schedule Recording cannot be

Recording will automatically stop if the signal becomes too weak. The

used.

Timeshift function will not work if there isn't enough storage space on the

 

USB device.

 

 

Anynet+ (HDMI-CEC) Isn't Working

When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.

The problem

 

Try this!

 

 

 

Confirm that the device is an Anynet+ device. The Anynet+ system supports

 

Anynet+ devices only.

 

 

Check if the power cord of the Anynet+ device is properly connected.

 

Check the cable connections of the Anynet+ device.

 

Go to Anynet+ (HDMI-CEC) (

Settings System Expert Settings

Anynet+ does not work.

Anynet+ (HDMI-CEC)) and see if Anynet+ (HDMI-CEC) has been set to On.

Check whether the TV remote control is in TV mode.

 

 

Check whether the remote control is Anynet+ compatible.

 

Anynet+ may not function when some other functions are active, including

 

Channel Search, Smart Hub, Plug & Play, etc.

 

If you have disconnected and then reconnected the HDMI cable, scan for

 

devices again or turn your TV off and on.

Check if the Anynet+ device is properly connected to the TV, and then select

I want to start Anynet+. the Anynet+ (HDMI-CEC) ( Settings System Expert Settings Anynet+ (HDMI-CEC)) menu to see if Anynet+ (HDMI-CEC) is set to On.

I want to exit Anynet+.

Set Anynet+ (HDMI-CEC) (

Settings System Expert Settings

Anynet+ (HDMI-CEC)) to Off.

 

 

 

 

 

 

The message "Connecting

You cannot use the remote control when the TV is configuring Anynet+

to Anynet+ device..." or

or switching to a viewing mode. Use the remote control after the TV has

"Disconnecting from Anynet+

completed the Anynet+ configuration or has switched to a viewing mode.

device" appears on the screen.