Cooling Your Room

You must select the Cool mode if you wish to adjust the:

◆Cooling temperature

◆Fan speed when cooling

1 If necessary, press the (On/Off) button.

Result:	◆ The POWER indicator on the indoor unit lights up.
	◆ The air conditioner starts up in the mode selected
	when the unit was last used.
	◆ The indoor unit beeps.

IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:

◆Plugged in

◆Stopped

lt will start up normally after three minutes.

2If the is not displayed at the top of the remote control,

press the MODE button on the remote control one or more times until it

appears.

Result: ◆ The indoor unit beeps each time you press the MODE button. ◆ The air conditioner runs in COOL mode.

Note You can change modes at any time.

3To adjust the temperature, press the TEMPERATURE buttons one or more times until the required temperature is displayed.

Possible temperatures are between 65°F(18°C) and 86°F(30°C) inclusive.

Result:	◆ Each time you press the TEMPERATURE buttons:
	- The temperature is adjusted by 1°F(1°C)
	- The indoor unit beeps
	◆ The air conditioner starts cooling, provided that the room
	temperature is higher than the selected temperature;
	the fan will, however, operate.