108
Software Notes
Pleaseensure that you read the instruction manual carefully before use.
Theattached software is a camera driver and image editing software tool for Windows.
Underno circumstances should all or part of either the software or the user manual be reproduced.
Copyrightfor both software is licensed only for use with a camera.
In the unlikely event of a manufacturing fault, we will repair or exchange your camera. We cannot,
however,be held responsible in any way for damage caused by inappropriate use.
Usinga Hand-made PC or a PC that has not been guaranteed by the manufacturer is not covered by
theSamsung warranty.
Beforereading this manual, you should have a basic knowledge of computers and O/S (Operating Systems).
Windowsis a registered trademark of Microsoft.
Macintosh,Mac is the registered trademark of Apple computer, USA.
Afterinserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should
automaticallyrun. Before connecting the camera to the PC, you should first install the camera driver.
Settingup the application program
Accessto the Samsung camera web-site.
Clickthe [Setup] menu on the Autorun frame and all of application software is installed.
Cameradriver : This enables images to transfer between the camera and PC.
Thiscamera uses the USB Storage Driver as the camera driver. You can use the camera as a USB
cardreader. After installing the driver and connecting this camera to the PC, you can find
[RemovableDisk] in [Windows Explorer] or [My computer]. A USB Storage Driver is provided only
forWindows. A USB Driver for MAC is not included with the Application CD. But you can use the
camerawith Mac OS 9.0~10.2.
Settingup the camera driver for WINDOWS (p.110)

About the software