53
RECORDING
Metering
Whenthe camera cannot calculate a desired exposure, you can change the metering method.
INFORMATION
Thedefault metering mode is Multi pattern metering.
Ifthe subject is not the centre of the focus, do not use the spot metering as there may be an
exposureerror. In this case, use exposure compensation.
Evenif the camera is restarted, the metering setting is maintained.
BACK:
PROG SETUP MyCAM
SET:OK
SIZE
QUALITY
METERING
SHOOTING
MULTI
SPOT
EXIT:
MENU
PROG SETUP MyCAM
PAGE:
SIZE
QUALITY
METERING
SHOOTING
2272x1704
FINE
MULTI
SINGLE
1.Rotate the mode dial to the RECORDING mode and press the
MENUbutton.
2.Press the DOWN button and the cursor will be shifted to the
mainmenu.
3.
Selectthe [METERING] menu by pressing the UP/DOWN button.
4.Press the RIGHT button and the cursor will shift to the
[METERING]sub menu.
5.Select the desired sub menu by pressing the UP/DOWN button.
-Multipatternmetering :
Exposurewill be calculated based on an average of the
availablelight in the image area. However, the calculation will
bebiased towards the centre of the image area.
-Spotmetering:
Usethis function when there is backlight or when
photographinga subject that has little contrast. In backlighting
conditionsadjust the light metering to suit the subject matter.
6.Press the OK button to confirm the setting.
Pressthe menu button twice and the menu display will disappear. Take a picture.