29
RECORDING
Starting recording mode
1.Insert the batteries (p.17).
Insertthe batteries taking note of the polarity (+ / -).
2.Insert the memory card (p.20).
3.Close the memory card cover.
4.Slide the power switchtoturnonthecamera.
5.Select the PROGRAM mode by rotating the mode dial.
6.
Pointthe camera towards the subject and compose the image by
usingeither the viewfinder or LCD monitor.
7.Press the shutter button to capture an image.
[DELETE]message may be displayed after taking a picture.
Referto p.93 for more information about [DEL. ANSWER].
Recordinga still image
PROGRAMmode
PROGRAMmode
INFORMATION
Mannermode
Pressingthe power button over 2 seconds changes the buzzer and start-up sound setting to
OFF,though you have set the settings to ON. If you wish to hear the buzzer sound and start-
upsound, set the [SOUND] and [S.SOUND] settings in the SETUP mode to ON.
Thereare two LED lamps (one green, one red) positioned next to the viewfinder.
-Ifthecamerais in focus when you press the shutter button halfway, the green LED will
illuminateand you can take an image. If the camera can focus on the subject, the
autofocusframe in the center of the LCD monitor will change from white to green.
-Iftheredlampilluminates,theflash can fire.
-Iftheredlampblinks,theflashisbeingcharged.
-Whenanimageisbeingstored onto the memory card, the green lamp blinks slowly. When
theimage data has been stored, the green LED light will go out. After the green LED light
hasgone out, you can resume taking images.
NOTICE
ABlinkingautofocusindicator lamp means that the camera cannot focus on the subject.
Shouldthis be the case, the camera is unable to capture an image clearly.