55
RECORDING
Shooting
INFORMATION
Continuousand AEB shots cannot be selected in the TIFF image quality format.
Totake the continuous shot, the number of available shots must be more than 2 because
theminimum number of the continuous shots are 2. To take the AEB shots, the number of
availableshots must be more than 3 because of the same reason.
Camera shake can be a problem when using the AEB shooting mode and it takes time to
storethe AEB image to the memory. We recommend using a tripod.
Youcan select the camera’s sensitivity to light by selecting the ISO sub menu. The speed or specific
light-sensitivityof a camera is rated by ISO numbers.
1.Rotate the mode dial to the RECORDING mode and press the MENU button.
2.Press the DOWN button and the cursor will be shifted to the main menu.
3.Select the [SHOOTING] menu by pressing the UP/DOWN button.
4.Press the DOWN button on the [SHOOTING] menu and the next menu page will be displayed.
5.Select the [ISO] menu by pressing the UP/DOWN button.
8.Press the OK button to confirm the setting.
Pressthe menu button twice and the menu display will disappear. Take a picture.
6.
Pressthe RIGHT button and the cursor will shift to the [ISO] sub menu.
7Selectthedesired sub menu by pressing the UP/DOWN button.
-AUTO :The camera's sensitivity is automatically
changedby variables such as lighting value or
subjectbrightness.
-100/200/400 :In the same lighting conditions, the higher the
ISO value is, the faster the shutter speed will
be.However, the images can be saturated in very bright conditions.
INFORMATION
The higher the number, the more sensitive it is to light. As with film, the higher speeds
usuallyinduce more electronic noise so the image gets grainier.
Evenif the camera is restarted, the the ISO setting will be maintained.
[AUTO]is not applied to A/S/M mode.

ISO

BACK:
PROG SETUP MyCAM
SET:OK
ISO
W.B
EFFECT
SHARP
AUTO
100
200
400