54
Shooting
Youcan select the continuous shooting or AEB shooting in this menu.
AEBis not available in the A/S/M mode.
1.Rotate the mode dial to the RECORDING mode and press the MENU button.
2.Press the DOWN button and the cursor will be shifted to the main menu.
3.Select the [SHOOTING] menu by pressing the UP/DOWN button.
4.Press the RIGHT button and the cursor will shift to the
[SHOOTING]sub menu.
5.Select the desired sub menu by pressing the UP/DOWN button.
-SINGLE:you can take only one picture at a time.
-CONTINUOUS: Inthis mode, you can capture moving
subjectscontinuously.
-AEB(AutoExposureBracket):
Inthis mode, you can take a
3-imagebracket of a scene.
Thereis an over exposed image, normally exposed image and
underexposed image in a bracket.
Whenyou select continuous shot or AEB, you can select the exposure bracket and the number of
continuousshots in [SHOOTING] sub menu.
6.Press the OK button to confirm the setting.
Pressthe menu button twice and the menu display will disappear. Take a picture.
INFORMATION
Theflash mode is set to “flash off” in continuous shooting and AEB shooting. After completing the
continuousor AEB shot, the shooting mode is changed to [SINGLE] automatically.
Once a continuous sequence has begun, it will continue until the selected number of shots
hasbeen taken. Releasing the shutter button will not interrupt this function.
Themaximum number of shots in a sequence is governed by the image settings.
Usinga 32MB SD memory card, the specified shooting capacity will be as follows.
(Thesefigures are intended as an indication of expected performance)
Ifyou change the image size or quality after selecting the continuous shot or AEB shot, the
shootingmode will be turned to single shot mode automatically.
Quality Size Large Photo Medium Small
TIFF (1:1) N/A N/A N/A N/A
Superfine (4:1) 3 3 14 59
Fine (8:1) 6 7 28 99
Normal (16:1) 10 11 42 99
BACK:
PROG SETUP MyCAM
SET:OK
SIZE
QUALITY
METERING
SHOOTING
SINGLE
CONTINUOUS
AEB