138
FAQ
Pleasecheck the following if the USB connection malfunctions.
[Case1] Thecamera power is off.
Turnthe camera power on. We recommend using an AC power adapter in PC mode.
Ifyou use batteries, check the battery condition.
[Case2] USBDriver is not installed correctly.
Installthe USB Driver correctly. Refer to page 110.
[Case3] TheUSB cable is not connected or you are using a cable with an incorrect specification.
Usea USB cable with the correct specification.
[Case4] Occasionallythe computer recognizes the USB as another device.
Installthe camera driver correctly. Turn the camera power off and remove the USB
cable.
Connectthe USB cable again and turn the camera power on. The computer should now
recognizethe camera.
[Case5] Thereis an unexpected error during file transfer.
Turnthe camera power off and on again. Transfer the file again.