Charging

It takes approximately 160 minutes to

 

completely charge when charging for the

WARNING

first time after purchase and can be used for

 

approximately 30 minutes in Max mode.

 

Rated input voltage of this product is 100 - 240 V~.

Charging lamp during charging (green)

1Turn on the emergency switch on the bottom

You must turn on the emergency switch to turn on POWERbot.

2Manually charge POWERbot by placing it on the charger

Make sure charge pins of POWERbot and the charger is aligned.

3Check the charging status

” will turn on according to charging progress and "FULL" will turn on when charging is complete.

ENGLISH-10

Page 118
Image 118
Samsung VR20J9259UC/EG manual Charging, ENGLISH-10, Rated input voltage of this product is 100 240 V~