Information codes

1 Below information codes appear on the display panel

2

Turn off the

3

Information code

 

emergency switch

 

will disappear

 

and check the below

 

when you turn on

 

instructions and take

 

the emergency

 

appropriate action

 

switch

 

 

 

 

Information codes

Checklist
The POWERbot is caught, stuck or trapped while moving around.

ffTurn off the emergency switch and move the POWERbot to another area.

Foreign matter caught in the Power brush.

ffTurn off the emergency switch and remove the foreign matter from the Power brush.

Foreign matter caught in the left Driving wheel.

ffTurn off the emergency switch and remove the foreign matter from the Driving wheel.

Foreign matter caught in the right Driving wheel.

ffTurn off the emergency switch and remove the foreign matter from the Driving wheel.

Bumper sensor needs to be checked.

ffTurn off the emergency switch and turn it back on.

ffWhen information code does not disappear, check if there's any small foreign matter between the bumper and the main body. If there is, pull the bumper slightly and remove the foreign matter.

Foreign matter accumulated on the obstacle sensor.

ffTurn off the emergency switch and clean the front and rear sensor with a soft cloth.

Foreign matter accumulated on the cliff sensor.

ffTurn off the emergency switch and clean the cliff sensor with a soft cloth.

ENGLISH-30