3
This chapter provides you the basic usage instructions for your Sansa® FuzeTM media player.
Basic Usage
Power Switch
The power switch is used to turn the player on or off as well as resetting it.
Power On
Slide the Power switch up to turn on the player. The Blue Ring will light up and the Main Menu will appear after it has been booted up.
Power Off
Slide the Power switch up and hold it for about 2 seconds to turn off the player.
NOTE: To prevent accidental power on, move the HOLD switch to the locked position.
Reset
To reset your player, slide the Power switch up and hold it for approximately 10 seconds.
Hold Function
All the function keys will be disabled once Hold is engaged by sliding the Power switch down until an orange bar appears. All the buttons on the player will not operate when Hold is active. Please note that the Lock function only works when the player is on.
The following image will appear on the display screen if any button is pressed while the device is in the Locked position. The music should continue to play even if the device is locked.
Basic Usage | 11 |
|
