Sangean Electronics WR-5, WR5 manual Remote control functions, Remote control battery replacement

Remote control functions

Many functions of the WR-5 tabletop receiver can be operated using the remote control. Some operations require a longer press of the button. In this case simply keep your finger held on the remote control button for 2-3 seconds until the display on the radio shows that the command has been accepted.

Before the first operation: please remove the small transparent foil from the battery holder to activate the battery.

Remote control battery replacement

1.Open the battery holder by pulling the holder out in direction shown.

2.Remove battery from holder.

3.Replace battery (CR2025 or equivalent) ensuring that the positive side of the battery faces you with holder positioned as shown.

4.Replace the battery holder.

IMPORTANT:

The batteries should not be exposed to excessive heat such

as sunshine, fire or the like. After use, disposable batteries should if possible be taken to a suitable recycling center. On no account should batteries be disposed of by incineration.

11