Sansui SLEDVD329A owner manual Starting setup, TV operation, To select the video input source

3

4

5

6

7

8

Starting setup

The Setup Wizard menu appears the first time you turn on the TV, and assists you to specify the Air/Cable setting, and program your channels automatically.

IMPORTANT: Make sure that the antenna or cable TV system connection is made!

1 To turn on the TV, press POWER. (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.) The Setup Wizard function begins.

Setup Wizard

TV Location Store

Go to next step

2 Press ▲ or ▼ to select “TV Location”, then press ◀ or ▶ to select “Store” or “Home”. This product qualifies for ENERGY STAR In Home mode default setting. Then press ▼ or ENTER.

NOTE:

• This unit has been preset to STORE brightness. This setting does not qualify under ENERGY STAR. To reduce brightness and energy consumption, change setting to ‘HOME’. This setting does qualify under

ENERGY STAR.

Press ▶ or ENTER to go to next step. Press ◀ or ▶ to select your time zone, then press ▼ or ENTER.

• In the rare event that you live within broadcast range of two stations in two different time zones, the TV may recognize the wrong station for the auto clock set.

Press ◀ or ▶ to select daylight saving time on or off, then press ▼ or ENTER.

Press ◀ or ▶ to select desired time format, then press ▼ or ENTER.

Press ▶ or ENTER to go to next step.

Press ▲ or ▼ to select “Air/Cable”, then press ◀ or ▶ to select signal type that you using, then press ▼ or ENTER.

9 Press ▶ or ENTER to go to next step.

10 Auto Scan will begin. After tuning is completed, the TV channel appears on the screen.

• Depending on the reception condition, it may take up to 30 minutes to complete memorizing digital cable channels. Please allow the process to complete without interruption.

NOTE:

• If you press MENU or EXIT in the process of “Auto Scan”, the Auto Scan stops and changes to normal screen.

• When you make a menu selection, your changes occur immediately.You do not have to press MENU to see your changes.

TV operation

1 To turn on the TV, press POWER. (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.)

2 Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by brown bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of brown bars also decreases.

3 Set the signal type option to the appropriate position (see “Air/Cable selection” on page 20).

4 Press the Direct Channel Selection (0-9, –) buttons to select the channel.

(If you press only channel number, channel selection will be delayed for a few seconds.)

TO SELECT ANALOG CHANNELS

1-9: Press 1-9 as needed. Example, to select channel 2, press 2, then press

ENTER.

10-99: Press the 2 digits in order. Example, to select channel 12, press 1, 2, then press ENTER.

100-135: Press the 3 digits in order. Example, to select channel 120, press 1, 2, 0, then press ENTER.

TO SELECT DIGITAL CHANNELS

Press the first 1-3 digits, then press the – button, followed by the remaining number.

Example, to select channel 15-1, press 1, 5, –, 1, then press ENTER.

• If a channel is selected with only audio content, “Audio Only” will be displayed on the screen.

• If a channel is selected with a weak digital signal, “No Signal” will be displayed on the screen.

The same program may be available on either an analog channel or a digital channel.You may choose to watch either format.

VHF/UHF/CABLE CHANNELS

Air		Cable
VHF		VHF
2-13		2-13
UHF	STD/HRC/IRC
14-69	14-36	(A) (W)
	37-59	(AA) (WW)
	60-85	(AAA) (ZZZ)
	86-94	(86) (94)
	95-99	(A-5) (A-1)
	100-135 (100) (135)
	01	(4A)

NOTE:

• If a channel with no broadcast is selected, the sound will automatically be muted.

• It may take a few seconds for a digital channel picture to appear on screen after being selected.

To select the video input source

To view a signal from another device connected to your TV, such as a VCR player, press INPUT SELECT, then press ▲ or ▼, then press ENTER.

15EN