INSTALLATION INSTRUCTIONS
– Split System Air Conditioner – COOL / DRY/HEAT Model
Contents
|
|
| Page |
IMPORTANT! |
| ||
Please Read Before Starting | 2 | ||
1. | GENERAL | 3 | |
| Tools Required for Installation (not supplied) | ||
| Accessories Supplied with Unit |
| |
| Optional Copper Tubing Kit |
| |
| Type of Copper Tube and Insulation Material | ||
| Field Wiring |
| |
| Additional Materials Required for Installation | ||
2. | INSTALLATION SITE SELECTION | 4 | |
| Indoor Unit |
| |
| Outdoor Unit |
| |
3. HOW TO INSTALL THE INDOOR UNIT | 6 | ||
| Remove the Rear Panel from the Unit |
| |
| Make a Hole |
| |
| Install the Rear Panel on the Wall |
| |
| Remove the Grille to Install the Indoor Unit | ||
| Shape the Indoor Side Tubing |
| |
| Wiring Instructions |
| |
| Recommended Wire Length and Diameter | ||
| Wiring Instructions for | ||
| Mounting |
| |
| Drain Hose |
| |
4. HOW TO INSTALL THE OUTDOOR UNIT | 15 | ||
| Wiring Instructions for the Outdoor Unit |
| |
5. | REFRIGERANT TUBING | 16 | |
| Use of the Flaring Method |
| |
| Flaring Procedure with a Flare Tool |
| |
| Caution before Connecting Tubes Tightly | ||
| Connecting Tubing between Indoor and |
| |
|
| Outdoor Units |
|
| Insulation of Refrigerant Tubing |
| |
| Taping the Tubes |
| |
Model Combinations
Combine indoor and outdoor units only as listed below.
Indoor Units | Outdoor Units |
KHS0951CH0951
KHS1251CH1251
Power Source:
60 Hz,
KHS1852CH1852
Power Source:
60 Hz,
| |
6. AIR PURGING | 18 |
■Air Purging with a Vacuum Pump (for Test Run)
■Basic Function of the Service Valves
■Pump Down
7.REMOTE CONTROL UNIT INSTALLATION
POSITION | 22 |
|
IMPORTANT
Power source for CH0951 and CH1251 is 60 Hz,
| In Canada |
SANYO FISHER COMPANY | SANYO Canada Inc. |
A DIVISION OF SANYO NORTH AMERICA CORPORATION | 300 Applewood Crescent, Concord |
21605 Plummer Street | Ontario, L4K 5C7, Canada |
85264189615003 © SANYO 2002 Chatsworth, CA 91311 U.S.A. |
|
| W |
