7. Remote Control Unit Installation Position
The remote control unit can be operated from either a
To ensure that the air conditioner operates correctly, do not install the remote control unit in the following places:
●In direct sunlight
●Behind a curtain or other place where it is covered
●More than 26 ft. (8 m) away from the air conditioner
●In the path of the air conditioner’s airstream
●Where it may become extremely hot or cold
●Where it may be subject to electrical or magnetic interference
7-1. Mounting on a Wall
1)Confirm the indoor unit beeps when the ON/OFF button is pressed at the wall location where the remote control unit is to be attached, then attach the holder to the wall. (Fig. 56)
2)When taking out the remote control unit, pull it from the holder.
When using the remote control unit
•Point the transmission portion of the remote control unit at the receiver area of the indoor unit when operating the remote control unit, and during operation of the air conditioner.
•Do not place objects that may block the trans- mitted signals between the receiver and the remote control unit.
When mounting the remote control unit to prevent theft
1)Mount the holder to the wall with one of the screws (using only the hole in the top of the holder) (Fig. 57).
2)Remove the cover of the remote control unit and take out the batteries. Next, place the remote control unit in the holder.
3)Fasten both the remote control unit and holder to the wall with the remaining screw (using the hole in the bottom of the holder).
4)Install the batteries in the remote control unit and close the cover.
5/32 ⋅ 5/8" (4 ⋅ 16mm supplied)
Remote control unit holder
Fig. 56
5/32 ⋅ 5/8" (4 ⋅ 16mm supplied)
Holder
Holder
Fig. 57
22
