UP383BA_0.book Page 18 Thursday, May 26, 2005 10:48 AM

GETTING STARTED

6)Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.

Important:

DO NOT use an AC outlet controlled by a wall switch.

Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.

Make sure the wall material is capable of supporting the weight of the base and handset.

Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.

[ E 1 8 ] Getting Started

Page 20
Image 20
Sanyo CLT-E32, CLT-E30, CLT-E33 instruction manual Direct wall mounting