Getting Started [E 33]
GETTING STARTED
4) Press vol/ or vol/ to select the handset you want to transfer the phonebook
locations to, and then press /select.
If you choose
All Memory
in the step 2,
Are you sure?
appears.
Press vol/ or vol/ to select
Yes
, and then press /select.
The phonebook locations will be transferred to the handset. On the receiving handset,
Receiving
and the handset name appear. When the transfer is complete,
Done!
appears
on the handset.
Voic e Ma il Ton e1) Enter the Global Setup menu, and then the Voice Mail Tone
submenu (see "Entering the Menu" on page E25).
2) Press vol/ or vol/ to set the voice message indication
(SDT message signal) to
On
or
Off
.
3) Press /select. You will hear a confirmation tone.
Notes:
•If an error occurs, the phonebook locations transferred before the error were stored in the receiving
handset.
Unavailable
appears on the display.
•
When the memory of the receiving handset is full,
Not enough memory in Receiving Handset
appears.
You cannot transfer the phonebook location.
8QKEG/CKN6QPG
1P
1HH
UP383BA_0.book Page 33 Thursday, May 26, 2005 10:48 AM