Sanyo CLT-E30, CLT-E33 Setting Up the Menu, Entering the Menu, Using the Walkie-Talkie Mode

UP383BA_0.book Page 25 Thursday, May 26, 2005 10:48 AM

GETTING STARTED

Setting Up the Menu

Entering the Menu

1)	Press the del/menu key in standby mode.
2)	Use vol/ or vol/ to move the pointer to a desired main	&KTGEV.KPM/QFG
	menu (Walkie-Talkie Mode, Room Monitor, Handset Setup,	4QQO/QPKVQT
	Global Setup, and System Reset).	*CPFUGV5GVWR

3)Press /select to select the desired main menu.

4)Use vol/ or vol/ to select a desired submenu, and then press /select to enter. In the submenu, use vol/ or vol/ to select an item.

Press /select to confirm your selection. For detailed instructions, see the following sections for the desired submenu.

5)To exit the menu, press end or place the handset to the cradle.

Walkie-Talkie (Direct-Link) Mode (For Multi Handsets)

Using the Walkie-Talkie Mode

1) Enter the Walkie-Talkie Mode menu. To enter DirectLink

mode press [SELECT] appears.

6QGPVGT

&KTGEV.KPMOQFG RTGUU=5'.'%6?

Getting Started [ E 2 5 ]