Sanyo CLT-E30, CLT-E33, CLT-E32 instruction manual Speed Dialing, Editing the Stored Data

UP383BA_0.book Page 55 Thursday, May 26, 2005 10:48 AM

PHONEBOOK

Speed Dialing

If you store a phone number in a speed dial memory location (10 locations: SPD1 - SPD0), you can use the speed dialing feature. When the phone is in standby mode, press and hold

anumber key (0-9) associated with the speed dial until the phone number appears, then press talk/flash or speaker. The number stored in speed dial (SPD1 - SPD0) is dialed.

Editing or Erasing a Stored Name, Phone Number, Distinctive Ring, and Speed Dial

1)When the phone is in standby mode, press phonebook.

2)Press vol/ or vol/ , or the number keypad to view the phonebook locations (see "Viewing the Phonebook" on page E53).

a. Editing the Stored Data

1)When the phonebook location to be edited appears, press

/select. Store/Edit Name appears.

2)Follow the steps 3 to 7 under "Storing Phone Numbers, Names, Distinctive Rings, and Speed Dial" on page E48 to complete the editing operation.

2JQPGDQQM

5GCTEJ=#<㨲㨱? 5VQTG=5'.'%6?

5VQTG'FKV0COG

/QXKGU

Phonebook [ E 5 5 ]