Sanyo CLT-E32, CLT-E30, CLT-E33 Additional Information, Changing the Digital Security Code

UP383BA_0.book Page 75 Thursday, May 26, 2005 10:48 AM

ADDITIONAL INFORMATION

Changing the Digital Security Code

The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In rare situations that you suspect another cordless telephone is using the same security code, you can change the code.

To change the digital security code:

1.Perform the "System Reset" menu options ("De-register the Handset" and "Replacing the Base Setting") for all the handsets you have (see page E34).

2.To register all the handsets do the following steps:

1)Place a handset in the base at a time.

2)Registration starts automatically.

Handset Registering appears in the display.

3)When Registration Complete appears in the display, the handset is registered to the base.

4)Repeat steps 1 - 3 for other handsets.

If Registration Failed appears in the display, try the steps above again.

Additional Information [ E 7 5 ]