Sanyo CLT-E33, CLT-E30 Room Monitor For Multi Handsets, Using Room Monitor, 6Q4QQO/QPKVQT

UP383BA_0.book Page 26 Thursday, May 26, 2005 10:48 AM

GETTING STARTED

2) Press /select to enter the Walkie-Talkie mode. You will hear a confirmation tone, and

DirectLink Mode Complete appears.

3)To exit the Walkie-Talkie mode, press del/menu, and then /select, or return the handset to the cradle.

Room Monitor (For Multi Handsets)

Using Room Monitor

1)Enter the Room Monitor menu (see "Entering the Menu" on page E25).

To Room Monitor appears.

2)Select the handset you want to monitor by using vol/ or vol/ .

3)Press /select.

RoomMonitor appears, and you hear sounds in the room where the handset is located.

4)To de-select the Room Monitor, press end or return the handset to the cradle.

6Q4QQO/QPKVQT

*CPFUGV

6Q4QQO/QPKVQT

*CPFUGV

Note:

This is an example, if you have handset #1 and #2.

[ E 2 6 ] Getting Started