4 Press SELECT.

Setting is finished and the initial settings screen is displayed.

ÁThe rating is locked. Any discs whose rating is higher than the setting cannot be played back unless the correct password is entered.

When the player is locked

The following screen appears when “2 Ratings” is selected at the initial settings screen.

Ratings

Enter your 4-digit password, then press SELECT.

****

Press RETURN to cancel

1. Input a 4-digit password and press SELECT.

Ratings

1 Unlock Player

2 Change Password

3 Change Level

4 Temporary Unlock

0 Exit

2.To unlock the player

Press “1” and then press SELECT.

To change the password

Press “2”, enter a new 4-digit password and press SELECT, then press SELECT again.

To change the rating level

Press “3”, select a new level by pressing the cursor buttons (A, B), then press SELECT.

To unlock the player temporarily Press “4” and then press SELECT.

ÁThe rating is unlocked temporarily only for the current disc or only until the player is set to the standby mode.

To finish setting without changing the rating level Press “0”.

Setting is finished and the initial settings screen is displayed.

Also refer to “Common procedures of initial settings” on

page 30.

Note:

ÁSome discs may not be encoded with specific rating level information though its disc jacket says that it is for “adults”. For those discs, the age restriction will not work.

Selecting language of On-Screen

Display menu

This is to select the language to be used in the On-Screen Display menus which the player will show on the TV monitor.

1 At the initial settings screen (on page 30)

Press the cursor buttons (A, B) to select “3 Menu Language” and press SELECT.

Select the language for these Menus.

1 English

2 Français

3 Español

Press RETURN to cancel

2 Press the cursor buttons (A, B) to select the preferred language and press SELECT.

1English:

English is selected. (Factory preset)

2Français/3 Español: Each language is selected.

Setting is finished and the initial settings screen is displayed.

Also refer to “Common procedures of initial settings” on

page 30.

Initial Settings

33