Connection
Connecting to an AV amplifier which does not contain Dolby Digital or dts (digital theater
systems) decoder
This DVD/Video CD/CD player contains a Dolby Digital decoder. This enables the playback of DVDs recorded in Dolby Digital Sur- round or Linear PCM without the need for an optional decoder with Dolby Digital or Linear PCM processing. When the DVD/Video CD/ CD player is connected to an AV amplifier with 5.1ch input connectors, you can enjoy
In the case of the AV amplifier with 5.1ch input connectors
In the case of the AV amplifier without 5.1ch input connectors
| VIDEO SIGNAL |
| |
6CH DISCRETE INPUT DVD/LD |
|
| |
CENTER SURROUND MAIN | AUDIO SIGNAL | ||
L | L | ||
| |||
R | R |
| |
SUB | DVD/LD |
| |
WOOFER |
|
|
AV amplifier without Dolby Digital/dts
decoder (optional)
To component video input
connectors (Y, CB, CR)
or
Video/audio cord
TV set (optional)
(supplied)
Audio cord
(optional)
S video cord
(optional)
Video cable (optional)
Direction of signal flow
DVD/Video CD/CD player
AUDIO OUT
PCM/UDIGITAL | 6CH DISCRETE | MIXED 2CH | |
DTS | CENTER SURROUND |
| MAIN |
| L | L | L |
OPTICAL COAXIAL |
| ||
VIDEO OUT
VIDEO
1
S VIDEO
COMPONENT VIDEO
Y CB CR
AC IN
R R
SUBWOOFER
R
2
Notes:
ÁAfter connection is made, set the “8 Speaker Setting” (such as Yes/No and Large/Small) according to your speaker sys- tem. (See page 40.)
ÁIf the surround speakers are set to “No” at the “8 Speaker Setting” (see page 40), the discs recorded in Linear PCM will be played back only in 2 channels even when the center speaker is connected as well as the front speakers.
ÁDVDs recorded in Linear PCM/96 kHz sampling in which “Center Speaker” is contained will also be played back only in 2 channels.
ÁIf the player is connected to the AV amplifier as shown above, audio recorded in dts will not be output. To enjoy dts sound, it is necessary to connect the player as shown on page 10.
12
