BASICS

Receiving a call

When an incoming call is received, the LED on the handset flashes, and the handset will show caller information. *

*Note: A subscription is required from your local phone company to receive Caller ID information on your phone. See Caller ID Features, page 16.

1.Press TALK/CALL BACK to answer the call.

Note: If handset is in the base cradle, remove it from base before pressing the TALK/CALL BACK key.

2.Press TALK/CALL BACK to end your call.

Note: If you replace the handset to the base cradle, the handset automatically hangs up.

Making a call

1.Press TALK/CALL BACK.

Note: If handset is in the base cradle, remove it from base before pressing the TALK/CALL BACK key.

2.Dial the phone number. The screen shows the number as you enter it.

Telephone Number

 

 

 

 

 

 

 

 

 

 

 

 

Timer

Volume Level

Channel No. Call

3. Press TALK/CALL BACK to end your call.

Volume adjustment

The VOLUME key adjusts the volume level of the earpiece. There are 4 volume levels.

1.Make sure the phone is in TALK mode.

2.Press the CID/VOL or key on the handset.

Ringer switch

The RINGER switch must be on for the handset to ring during incoming calls.

13

Page 13
Image 13
Sanyo CLT-J30 Basics, Receiving a call, Making a call Press TALK/CALL Back, Volume adjustment, Ringer switch