Changing the Face Plates, Power Failure

CHANGING THE FACE PLATES

1.Carefully remove the existing handset cover by prying up the notch at the bottom of the cover.

2.Reattach new cover by snapping the upper portion of the cover into position first, and then snap the lower portion into the place.

**Optional face plates can be bought separately, please visit our web site www.sanyocanada.com for details.

RECYCLING NICKEL-METAL HYDRIDE BATTERIES

NICKEL-METAL HYDRIDE BATTERIES MUST BE

DISPOSED OF PROPERLY.

Please take your used battery pack to a store that recycles Ni-MH batteries.

POWER FAILURE

When power is off, you will not be able to make or receive calls with the telephone.

After a power outage, place the handset in the base for about 20 seconds to reset the digital security code.

Page 24

Image 24

Sanyo CLT-J30 instruction manual Changing the Face Plates, Recycling NICKEL-METAL Hydride Batteries, Power Failure

Contents

CLT-J30 Sanyo Canada Inc Table of Contents Recycling NICKEL-METAL Hydride Batteries Main Features GHz Technology Other featuresIntroduction Compander Plus Noise Reduction Checking package contents Getting StartedModular jack Battery setup Tone/pulse settingTelephone line connection Mounting on a wall Digital Security System Names and Controls Handset Base Unit Language setting Area code settingInitial Programming Press FLASH/PROG until 1 ENG 2 FRA 3 ESP shows on screen DND setting LCD contrast Resetting to default Idle animation Volume adjustment Ringer switchBasics Receiving a call Pre-dialing up to 32 digits Press TALK/CALL Back Changing the pre-dial numberRedialing Fast redialing Press TALK/CALL Back Low battery warning Voice mail indicatorHandset locator Paging function Mute key Caller ID Features Caller ID with Call WaitingCaller ID list Reviewing Caller ID list Format Caller ID numbersStoring Caller ID entries in the directory Dialing a Caller ID number Deleting entries from the Caller list Deleting the displayed entryDeleting all entries Directory Store a number in the directory Replacing a directory entry with a Caller ID entry Changing a stored numberMaking calls from the directory Reviewing and deleting directory contents Chain dialing from the directoryNumber for Memory Location Changing the Battery Battery replacement and handling Power Failure Changing the Face PlatesRecycling NICKEL-METAL Hydride Batteries Light Signals Headset Jack and Belt Clip Error LCD Screen Messages Sound Signals TroubleshootingCaller ID error message No display Dial tone is OK, but cannot dial out Handset does not ringYou experience static, noise, or fading in and out Phone beeps Maintenance Causes of poor reception Maximize Battery Performance Keep the contacts cleanRefresh battery Charge it for a full 12 hours Technical Information Technical Information Sanyo Comfort Warranty What is not Covered SOS Help Line Between 830 am 700 pm EST

Sanyo CLT-J30 Changing the Face Plates, Recycling NICKEL-METAL Hydride Batteries, Power Failure

Models: CLT-J30

CHANGING THE FACE PLATES

RECYCLING NICKEL-METAL HYDRIDE BATTERIES

POWER FAILURE