HEADSET JACK AND BELT CLIP
Headset connection (Headset not included)
For hands free conversation, connect the headset (not included) to the HEADSET jack. The handset earpiece and microphone are disabled when the headset is connected.
Press TALK/CALL BACK to answer or place a call while using the headset.
Belt clip installation
•Attach the belt clip by inserting the sides of the belt clip into the slots.
•Snap the ends of the belt clip into place.
Belt clip slot
LIGHT SIGNALS
The charge/in use & incoming call/in use indicator will change under the following conditions.
CHARGE/IN USE LED on the base
| Talking | Lit steadily |
| Charging | Lit steadily |
| Incoming call | Flashes in same pattern as telephone ring |
| Paging | Flashes every 0.5 second |
| Voice mail | Flashes every 1 second |
|
| |
INCOMING CALL/IN USE LED on the handset | ||
|
|
|
| Talking | Lit steadily |
|
|
|
| Paging | Flashes every 1 second |
|
|
|
| Low battery | Flashes every 15 seconds |
|
|
|
| Incoming call | Flashes in same pattern as telephone ring |
25
